Pumps - BT - High Viscosity

Sealed, High Viscosity

This stainless steel model with sealed design is made with PTFE screw-type lifting compressors to handle liquids with higher viscosities.

Features include:

  • Stainless steel tube construction
  • Tube interchangeable with motors
  • Up to 15,000 cP with 3 hp motor

 


 

 Available Lengths:
 40 in (102 cm)
 Tube Diameter:
 2 in (5.1 cm)
 Discharge Size:
 1-1/2 in (3.8 cm)
 Discharge Types:
 Hose barb
 Hose Size:
 1-1/2 in (3.8 cm)

 

   Electric Motor  Air Motor
 Maximum Flow:  10 gpm (38 lpm)  10 gpm (38 lpm)
 Maximum Head:  200 ft (61 m)  200 ft (61 m)
 Maximum Specific Gravity:  1.8  1.8
 Maximum Viscosity:  15,000 cP  15,000 cP

 

 Tube Material:
 316 stainless steel
 Shaft Material:
 316 stainless steel
 Spacer Material:
 FEP
 Compressor Material:
 PTFE with stainless steel pin

 

   
 Maximum Temperature:  200º F (93º C) 
 Minimum Temperature:  -20º F (-29º C)

 

TEFC (Totally Enclosed Fan Cooled) IP54 Motors

 Model
Certification
 Requirements

Output
(kW)

RPM Maximum Viscosity
 M15
*
 230-460V/60Hz
0.75 3450 800 cP
 M16
*
 230-460V/60Hz
1.1 1725 7,000 cP
 M17 * 230-460V/60Hz 2.2 1725 15,000 cP
 M27 * 115-230V/60Hz 0.75 3450 800 cP
M28 * 115-230V/60Hz 1.5 1725 7,000 cP
M29 * 115-230V/60Hz 2.5 1725 15,000 cP
M39 * 220-380-440V/50-60Hz 0.75 2850 1,000 cP
M40 * 220-380-440V/50-60Hz 1.5 1425 8,500 cP

*Carries independent testing laboratory approval.
Note: Input power for induction motors will vary by manufacturer.

 

Explosion Proof Motors

 Model
Certification
 Requirements

Output
(kW)

RPM Maximum Viscosity
 M33X
*
 115-230V/60Hz
0.75 3450 800 cP
 M34X
*
 115-230V/60Hz
1.5 1725 7,000 cP
 M24X * 230-460V/60Hz 0.75 3450 800 cP
 M25X * 230-460V/50-60Hz 1.5 1450/1725 7,000 cP
M26X * 230-460V/50-60Hz 2.2 1450/1725 15,000 cP

Carries independent testing laboratory approval.
Note: Input power for induction motors will vary by manufacturer.

 

Air Motors*

Model
Certification
 Requirements

Output
(kW)

RPM Maximum Viscosity
M18
CE
100psi@14-70cfm
0.75 300-3,000 800 cP
M19
CE
100psi@80-120cfm
1.5 300-3,000 7,000 cP
M20 CE 100psi@120-170cfm 2.5 300-2,500 15,000 cP

An air motor is a non-electrical device, reducing possibility of explosion from igniting flammables.  
*Suitable for hazardous areas that do not require independent verification.

pump image