GP Series Pumps

Sealed Pumps - GP11


Applications

  • Chemical processing, spraying, transfer
  • Plating recirculation/filtration, PCB etching/rinse
  • Mild corrosive or low budget applications where periodic seal replacement is not an issue

Specifications

Performance

Exploded View

Downloads

Suction Port Size 1.5 in
Discharge Port Size 1.5 in
Connection Types NPT or BSP
Maximum Specific Gravity over 1.8
Maximum Working Pressure 35 psi (2.4 bar)
@3450 RPM @2900 RPM
Flow Range* 10 to 126.4  gpm 2.27 to 23.5 m3/h
Maximum Head 81.9 ft 17 m
Power Range** 0.4 to 3.2 hp 0.22 to 1.5  kW
*See Performance tab for individual impeller diameter capability
**Smallest to largest impeller on 1.0 s.g.
Type Mechanically Sealed
Configuration Horizontal
Construction Materials Polypropylene or PVDF
O-Ring Materials FKM or EPDM
Seal Types Bellows, Multispring, or Double
Rotating Face Materials Carbon, GF PTFE, Siliconized Carbon or SiC
Stationary Face Materials: High Purity Ceramic, SiC or Ni-Resist
Elastomer Materials FKM, EPDM, or Kalrez®
Polypropylene PVDF
Maximum Temperature: 180º F (82º C) 220º F (104º C)

Parts:

  • 1. Impeller Housing
  • 2. Housing Cover
  • 3. Impeller
  • 5. Cooling/Press Collar
  • 6. Motor Adapter
  • 7. Seals
  • 8. Retaining Ring
  • 9. Hex Bolt
  • 10. Flat Washer
  • 11. Hex Bolt
  • 12. Lock Washer
  • 14. Housing O-Ring
  • 15. Cooling Collar O-Ring
  • 17. Cooling Collar Seal
  • 18. Slinger Ring
  • 20. Shaft Adapter with Set Screws
  • 20A. Set Screw
  • 21. Cooling Collar Assembly
  • 22. Protective Guard
  • 23. Guard Shroud Screw
  • * Restrictor Bushing
  • * Pipe Plug

Specifications


Suction Port Size 1.5 in
Discharge Port Size 1.5 in
Connection Types NPT or BSP
Maximum Specific Gravity over 1.8
Maximum Working Pressure 35 psi (2.4 bar)
@3450 RPM @2900 RPM
Flow Range* 10 to 126.4  gpm 2.27 to 23.5 m3/h
Maximum Head 81.9 ft 17 m
Power Range** 0.4 to 3.2 hp 0.22 to 1.5  kW
*See Performance tab for individual impeller diameter capability
**Smallest to largest impeller on 1.0 s.g.
Type Mechanically Sealed
Configuration Horizontal
Construction Materials Polypropylene or PVDF
O-Ring Materials FKM or EPDM
Seal Types Bellows, Multispring, or Double
Rotating Face Materials Carbon, GF PTFE, Siliconized Carbon or SiC
Stationary Face Materials: High Purity Ceramic, SiC or Ni-Resist
Elastomer Materials FKM, EPDM, or Kalrez®
Polypropylene PVDF
Maximum Temperature: 180º F (82º C) 220º F (104º C)

Performance


Exploded View


Parts:

  • 1. Impeller Housing
  • 2. Housing Cover
  • 3. Impeller
  • 5. Cooling/Press Collar
  • 6. Motor Adapter
  • 7. Seals
  • 8. Retaining Ring
  • 9. Hex Bolt
  • 10. Flat Washer
  • 11. Hex Bolt
  • 12. Lock Washer
  • 14. Housing O-Ring
  • 15. Cooling Collar O-Ring
  • 17. Cooling Collar Seal
  • 18. Slinger Ring
  • 20. Shaft Adapter with Set Screws
  • 20A. Set Screw
  • 21. Cooling Collar Assembly
  • 22. Protective Guard
  • 23. Guard Shroud Screw
  • * Restrictor Bushing
  • * Pipe Plug

Downloads


Don’t know which pump best suits your needs?

Let us help find the right pump for your needs.

Pump Selector Tool