BT Series Drum/Barrel Pumps

Drum/Barrel Pumps - BTS Drum Pumps

This stainless steel model with sealed design is made with PTFE screw-type lifting compressors to handle liquids with higher viscosities.

Applications

  • Oils
  • Resins
  • Solvents
  • Adhesives
  • Polymers
  • Gear lube
  • Glycerin

Specifications

Motors

Video

Downloads

Available Lengths 40 in (102 cm)
Tube Diameter 2 in (5.1 cm)
Discharge Size 1-1/2 in (3.8 cm)
Discharge Type Hose Barb, MNPT, or Tri-Clamp
Hose Size 1-1/2 in (3.8 cm)
Electric Motor Air Motor
Maximum Flow 10 gpm (38 lpm) 10 gpm (38 lpm)
Maximum Head 200 ft (61 m) 200 ft (61 m)
Maximum Specific Gravity 1.8 1.8
Maximum Viscosity 15,000 cP 15,000 cP
Tube Material 316 stainless steel
Shaft Material 316 stainless steel
Spacer Material FEP
Compressor Material PTFE with stainless steel pin
Maximum Temperature 200º F (93º C)
Minimum Temperature -20º F (-29º C)

M15-M17, M27-M29, M39, M40, M24X-M26X, M33X, M34X

M18, M19, M20

TEFC (Totally Enclosed Fan Cooled) IP54 Motors
Model Certifications Requirements Output
(kW)		 RPM Maximum Viscosity
M15 * 230-460V/60Hz 0.75 3450 800 cP
M16 * 230-460V/60Hz 1.1 1725 7,000 cP
M17 * 230-460V/60Hz 2.2 1725 15,000 cP
M27 * 115-230V/60Hz 0.75 3450 800 cP
M28 * 115-230V/50-60Hz 1.5 1725 7,000 cP
M29 * 115-230V/50-60Hz 2.5 1725 15,000 cP
M39 * 220380-440V/50-60Hz 0.75 2850 1,000 cP
M40 * 220-380-440V/50-60Hz 1.5 1425 8,500 cP

* Carries independent testing laboratory approval.
** Input power for induction motors will vary by manufacturer.

Explosion Proof Motors
Model Certifications Requirements Output
(kW)		 RPM Maximum Viscosity
M33X * 115-230V/60Hz 0.75 3450 800 cP
M34X * 115-230V/60Hz 1.5 1725 7,000 cP
M24X * 230-460V/60Hz 0.75 3450 800 cP
M25X * 230-460V/50-60Hz 1.5 1450/1725 7,000 cP
M26X * 230-460V/50-60Hz 2.2 1450/1725 15,000 cP

* Carries independent testing laboratory approval.
** Input power for induction motors will vary by manufacturer.

Air Motors*†
Model Certifications Requirements Output
(kW)		 RPM Maximum Viscosity
M18 CE 100psi@14-70 cfm 0.75 300-3,000 800 cP
M19 CE 100psi@80-120 cfm 1.5 300-3,000 7,000 cP
M20 CE 100psi@120-170 cfm 2.5 300-2,500 15,000 cP

† An air motor is a non-electrical device, reducing possibility of explosion from igniting flammables.
*Suitable for hazardous areas that do not require independent verification.

Specifications

Available Lengths 40 in (102 cm)
Tube Diameter 2 in (5.1 cm)
Discharge Size 1-1/2 in (3.8 cm)
Discharge Type Hose Barb, MNPT, or Tri-Clamp
Hose Size 1-1/2 in (3.8 cm)
Electric Motor Air Motor
Maximum Flow 10 gpm (38 lpm) 10 gpm (38 lpm)
Maximum Head 200 ft (61 m) 200 ft (61 m)
Maximum Specific Gravity 1.8 1.8
Maximum Viscosity 15,000 cP 15,000 cP
Tube Material 316 stainless steel
Shaft Material 316 stainless steel
Spacer Material FEP
Compressor Material PTFE with stainless steel pin
Maximum Temperature 200º F (93º C)
Minimum Temperature -20º F (-29º C)

Motors

M15-M17, M27-M29, M39, M40, M24X-M26X, M33X, M34X

M18, M19, M20

TEFC (Totally Enclosed Fan Cooled) IP54 Motors
Model Certifications Requirements Output
(kW)		 RPM Maximum Viscosity
M15 * 230-460V/60Hz 0.75 3450 800 cP
M16 * 230-460V/60Hz 1.1 1725 7,000 cP
M17 * 230-460V/60Hz 2.2 1725 15,000 cP
M27 * 115-230V/60Hz 0.75 3450 800 cP
M28 * 115-230V/50-60Hz 1.5 1725 7,000 cP
M29 * 115-230V/50-60Hz 2.5 1725 15,000 cP
M39 * 220380-440V/50-60Hz 0.75 2850 1,000 cP
M40 * 220-380-440V/50-60Hz 1.5 1425 8,500 cP

* Carries independent testing laboratory approval.
** Input power for induction motors will vary by manufacturer.

Explosion Proof Motors
Model Certifications Requirements Output
(kW)		 RPM Maximum Viscosity
M33X * 115-230V/60Hz 0.75 3450 800 cP
M34X * 115-230V/60Hz 1.5 1725 7,000 cP
M24X * 230-460V/60Hz 0.75 3450 800 cP
M25X * 230-460V/50-60Hz 1.5 1450/1725 7,000 cP
M26X * 230-460V/50-60Hz 2.2 1450/1725 15,000 cP

* Carries independent testing laboratory approval.
** Input power for induction motors will vary by manufacturer.

Air Motors*†
Model Certifications Requirements Output
(kW)		 RPM Maximum Viscosity
M18 CE 100psi@14-70 cfm 0.75 300-3,000 800 cP
M19 CE 100psi@80-120 cfm 1.5 300-3,000 7,000 cP
M20 CE 100psi@120-170 cfm 2.5 300-2,500 15,000 cP

† An air motor is a non-electrical device, reducing possibility of explosion from igniting flammables.
*Suitable for hazardous areas that do not require independent verification.

Video

Downloads

Don’t know which pump best suits your needs?

Let us help find the right pump for your needs.

Pump Selector Tool