AP Series | AC Model Pumps
Sealed Pumps - AC8
Applications
- Chemical processing
- Printed circuit boards
- Pharmaceutical
- Waste water treatment
Specifications
Performance
Exploded View
Downloads
| Port Sizes (Suction x Discharge) & Connection Types |
2 in x 1-1/2 in NPT or BSP 2-1/2 in x 2 in NPT or BSP 2-1/2 in x 2 in ANSI #150 flanges 2 in x 1-1/2 in ANSI #150 flanges 2 in x 2 in ANSI #150 flanges 2-1/2 in x 1-1/2 in ANSI #150 flanges 3 in x 2 in ANSI #150 flanges 3 in x 3 in ANSI #150 flanges 2-1/2 in x 1-1/2 in electropolished tri-clamps |
|---|---|
| Maximum Specific Gravity | up to 1.8 |
| Maximum Working Pressure | 120 psi (8.3 bar) |
| Maximum Temperature | 300º F (149º C) |
| @3450 RPM | @2900 RPM | |
|---|---|---|
| Flow Range* | 20 to 321.2 gpm | 4.54 to 58.3 m3/h |
| Maximum Head | 247 ft | 53.2 m |
| Power Range** | 5.5 to 15 hp | 1.8 to 9.1 kW |
| *See Performance tab for individual impeller diameter capability **Smallest to largest impeller on 1.0 s.g. |
||
| Type | Stainless Steel Mechanically Sealed | |
|---|---|---|
| Configuration | Horizontal | |
| Construction Materials | 316 Stainless Steel | |
| O-Ring Materials | FKM, EPDM, Buna, or PTFE Encapsulated Silicone | |
| Seal Type | Bellows Type 21 | |
| Seal Materials | Carbon, Ceramic, SiC, FKM, EPDM, Buna, or Kalrez® | |
| Kalrez® is a registered trademark of DuPont Performance Elastomers | ||
Parts:
- 1. Impeller Housing
- 3. Impeller 316 Stainless Steel
- 4. Impeller 316 Stainless Steel
- 5. Mechanical Seal
- 6. Impeller Bolt
- 7. Backhead
- 8. Cast Iron Motor Adapter
- 8A. Motor Adapter Flange
- 9. Cap Screw (4 req'd.)
- 10. Lock Washer (4 req'd.)
- 11. Flat Washer
- 12. Cap Screw (8 req'd.)
- 13. Lock Washer (8 req'd.)
- 14. Mounting Plate
- 15. Flat Washer (16 req'd.)
- 16. Cap Screw (8 req'd.)
- 17. Lock Washer (8 req'd.)
- 18. Nut (8 req'd.)
Additional downloads available upon request, please contact sales@finishthompson.com
Specifications
| Port Sizes (Suction x Discharge) & Connection Types |
2 in x 1-1/2 in NPT or BSP 2-1/2 in x 2 in NPT or BSP 2-1/2 in x 2 in ANSI #150 flanges 2 in x 1-1/2 in ANSI #150 flanges 2 in x 2 in ANSI #150 flanges 2-1/2 in x 1-1/2 in ANSI #150 flanges 3 in x 2 in ANSI #150 flanges 3 in x 3 in ANSI #150 flanges 2-1/2 in x 1-1/2 in electropolished tri-clamps |
|---|---|
| Maximum Specific Gravity | up to 1.8 |
| Maximum Working Pressure | 120 psi (8.3 bar) |
| Maximum Temperature | 300º F (149º C) |
| @3450 RPM | @2900 RPM | |
|---|---|---|
| Flow Range* | 20 to 321.2 gpm | 4.54 to 58.3 m3/h |
| Maximum Head | 247 ft | 53.2 m |
| Power Range** | 5.5 to 15 hp | 1.8 to 9.1 kW |
| *See Performance tab for individual impeller diameter capability **Smallest to largest impeller on 1.0 s.g. |
||
| Type | Stainless Steel Mechanically Sealed | |
|---|---|---|
| Configuration | Horizontal | |
| Construction Materials | 316 Stainless Steel | |
| O-Ring Materials | FKM, EPDM, Buna, or PTFE Encapsulated Silicone | |
| Seal Type | Bellows Type 21 | |
| Seal Materials | Carbon, Ceramic, SiC, FKM, EPDM, Buna, or Kalrez® | |
| Kalrez® is a registered trademark of DuPont Performance Elastomers | ||
Performance
Exploded View
Parts:
- 1. Impeller Housing
- 3. Impeller 316 Stainless Steel
- 4. Impeller 316 Stainless Steel
- 5. Mechanical Seal
- 6. Impeller Bolt
- 7. Backhead
- 8. Cast Iron Motor Adapter
- 8A. Motor Adapter Flange
- 9. Cap Screw (4 req'd.)
- 10. Lock Washer (4 req'd.)
- 11. Flat Washer
- 12. Cap Screw (8 req'd.)
- 13. Lock Washer (8 req'd.)
- 14. Mounting Plate
- 15. Flat Washer (16 req'd.)
- 16. Cap Screw (8 req'd.)
- 17. Lock Washer (8 req'd.)
- 18. Nut (8 req'd.)
Downloads
Additional downloads available upon request, please contact sales@finishthompson.com