UCP SERIES
ANSI DIMENSIONAL PUMPS
Outstanding chemical resistance and enhanced hydraulic capabilities at a lower cost
- Polypropylene/ETFE construction means you don’t have to pay more for chemical resistance than you require
- Sealless mag-drive design features complete encapsulation of magnets in pure, unfilled polypropylene for superior corrosion resistance
- Barrier features glass-filled polypropylene liner with a carbon-fiber reinforced exterior shell for exceptional strength
- ANSI dimensional for efficient installation
Series Features
- Pure, unfilled polypropylene barrier for maximum protection against permeation from aggressive chemicals
- Every inner drive is 100% vacuum tested to ensure complete magnet encapsulation
- Built-in reliability based on Industry’s lowest radial loads
- Careful design balances axial forces inside the pump to control excess thrust loads
- Fully supported shaft and dual bushings designed for optimum alignment preventing premature wear
- PTFE ring locks impeller bushings in place, eliminating possibility of movement from temperature cycling
SPECIFICATIONS
- Maximum working pressure to 300 psi (21 bar)
- Maximum viscosity: over 200 cP
- Maximum temperature: 180°F (82°C)
- Flow range: models up to 450 gpm (102.2 m3/hr)
- Maximum head: models up to 330 feet (100.6 meters)
- Specific gravity: over 1.8
- Casing: ANSI/ASME B73.1m & 73.3
- Flanges: ANSI 150#, ANSI 300#, or ISO PN40
- Certifications: CE/UKCA
- Motor frames: NEMA: 143-286 TSC | IEC: 90-160 | Bearing frame | Gas engine
