TM Series Drum/Barrel Pump Mixer
TM Series Drum/Barrel Pump Mixer
Sealed • Low/Medium Viscosity
- A 4-blade, turbine drum mixer ideal for mild corrosives, solvents, or flammables† of light to medium viscosity
- Fluid is pulled into the top of the mixer tube and is discharged under pressure out of the bottom in a continuous blending cycle
- Top-to-bottom mixing action allows rapid suspension of settled solids
Series Features
- A 4-blade, turbine drum mixer ideal for mild corrosives, solvents, or flammables† of light to medium viscosity
- Fluid is pulled into the top of the mixer tube and is discharged under pressure out of the bottom in a continuous blending cycle
- Top-to-bottom mixing action allows rapid suspension of settled solids
- Non-aerating, non-vortexing circulation
- Loosens and suspends bottom sediments
- Handles corrosive materials
- 316 stainless pump tube is interchangeable with multiple motors
- Up to 1500 cP with air motor
SPECIFICATIONS
- Maximum circulation: 14 gpm (53 lpm)
- Maximum temperature: 200°F (93°C)
- Maximum specific gravity: 1.8
- Maximum viscosity: 1500 cP
- 2 in (5.1 cm) tube diameter
- 1 in (2.5 cm) discharge
- Tube length: 40" (102 cm)
- †When pumping flammables or combustibles, use explosion-proof electric or air drive motors on stainless steel tubes with static protection kit.
- *All testing performed with water at 68°F (20°C). Actual performance may vary by +/- 10%. Actual performance will decrease with increased fluid viscosity and specific gravity.
