SP Series

SP Series Self-Priming Pumps

The Most Innovative and Versatile Mag-Drive Centrifugal Pump

  • Sealless mag-drive design
  • Big on power - short on energy consumption
  • Deep-lift capabilities (up to 25 feet/7.6 meters)
  • Lightning-fast priming (18 feet/5.5 meters in 90 seconds)
  • Ease of operation
  • No seal replacement and no leaks
  • Corrosion-resistant materials handle the most difficult applications

Series Features

  • Retains fluid for re-priming when shut off without a check valve
  • Close-coupled design
  • Polypropylene or PVDF construction
  • Neodymium magnets on every model
  • Replaceable shaft and bushing
  • ISO 1940 G2.5 balancing
  • Mounts to NEMA and IEC motor frames
  • Easy Set measurement-free outer drive
  • Mounts to motor without disassembly
  • Back pullout design
  • Five-year warranty
  • CE/UKCA/EAC certified

SPECIFICATIONS

  • High working pressure up to 90 psi (6.2 bar)
  • Maximum viscosity over 50 cP
  • Maximum temperature: - Polypropylene: 180°F (82°C) - PVDF: 220° F (104°C)
  • Flow range: models from <1 to 253 gpm (.06 to 57.5 m3/hr)
  • Maximum head: models from 20 to 221 ft (4.5 to 50 m)
  • Lifts up to 25 feet (7.6 meters) (as determined on fresh, cold water)
  • Primes up to 18 feet (5.5 meters) in 90 seconds (with maximum diameter impeller)

Downloads

Ready to buy a SP Series Pump?