Corrosive Chemical Transfer Pump for Chemical Manufacturing & Distribution

Finish Thompson offers a full line of industrial chemical pumps designed to handle the harsh conditions of chemical manufacturing and distribution. From simple transfer to complex manufacturing processes, Finish Thompson centrifugal chemical pumps and drum and barrel pumps offer reliable, durable solutions for corrosive chemical handling.

Typical Applications

  • Transfer chemicals from bulk storage to blending tanks
  • Circulate chemicals in blending tanks
  • Load/unload chemicals from trucks & rail cars
  • Load chemicals on filling machines
  • Transfer chemicals through piping within the plant
  • Provide flow through heat exchangers

A CASE IN POINT

Finish Thompson Mag Drive Pumps Prove Ideal for Chemical Transfer

“I wanted a pump that didn’t leak, and the Finish Thompson pump fit the ticket,” explains Bruce Gray, Southern States Cooperative Plant Manager.

Finish Thompson Mag Drive Pumps Prove Ideal for Chemical Transfer “I wanted a pump that didn’t leak, and the Finish Thompson pump fit the ticket,” explains Bruce Gray, Southern States Cooperative Plant Manager.

Gray has good reason for leak concerns. He’s using the Finish Thompson pump to transfer phosphoric acid. “The pump is outside on the railroad track, and I need the right pump to prevent environmental pollution,” Gray notes.

As one of the largest farm supply and service cooperatives in the country, Southern States Cooperative provides a variety of farm inputs, including fertilizer. The phosphoric acid that is unloaded from rail cars by a Finish Thompson ULTRAChem® pump is used in the production of this fertilizer.
ULTRAChem Pump Offers Triple Play
Why is the ULTRAChem Series mag drive pump ideal for this application?

“The pump offers three benefits,” reports the local distributor who supplies the Finish Thompson pumps for Southern States. “The first is the pump’s design for chemical resistance. If you’re pumping a harsh chemical, like phosphoric acid, the ULTRAChem pump has the liner to protect the pump from corrosion. The second benefit is the mag drive. It doesn’t have a mechanical seal that will wear out. There is a complete barrier between the wet end of the pump and the drive of the motor. The outer drive magnet couples with the interior, eliminating the need for a mechanical seal.”

“The third benefit,” the distributor explains, “is the ANSI design. As an ANSI-dimensional pump, it is designed to fit universally to other products without changing any piping.”

The second benefit – the magnetic drive – offered the most appeal for the Southern States application. “We went with Finish Thompson because of this technology,” reported the distributor. “The pump they were using had a mechanical seal, and eventually, the fluid will leak out just from normal use. This isn’t the case with the magnetic drive.”

Will Weathers, Finish Thompson Regional Manager, adds, “If you use a pump with a mechanical seal, you’ll have to continually replace it. The seals may wear out a couple of times a year. Depending on the chemical application, this replacement could involve the use of hazmat suits and several hours of down time. The magnetic drive of our pumps offers a long-term, safer solution. The ANSI standard adds further appeal, as it makes installation easier.”

The distributor agrees, “Southern States has been using the UC438 pump for nearly four years, and they have had no issues whatsoever with it. They’ve also added a Finish Thompson power monitor to protect the pump from running dry. If there is a loss of fluid elsewhere, or the valve gets shut down while the pump is running, the M20 power monitor will shut off the pump to protect it from overheating.”

“Finish Thompson has been very responsive whenever I need anything,” Gray says. The distributor reports similar experiences, noting, “As a whole, Finish Thompson is one of the best for service, responsiveness, and delivery. I feel very confident with their product line and their support.”

Read More

Pump Details

Magnetically coupled, sealless centrifugal pumps. While NOT manufactured from FDA compliant materials, Finish Thompson DB Series and SP Series pumps are designed from the ground up to pump corrosive chemicals…

  • No mechanical seal – Powerful rare earth magnetic drive system eliminates the troublesome mechanical seal.

  • Corrosion resistant – Engineered for the most aggressive liquids, manufactured from polypropylene or PVDF.

  • Run dry ability – Makes them less prone to operator error or system upset.

  • Self-priming option – SP Series pumps can lift fluid from as deep as 25 feet (7.6 meters) below the pump or can pull liquid out of the top of a tank eliminating through-the-sidewall bulkhead fittings.

†When pumping flammables or combustibles, use explosion-proof electric or air drive motors on stainless steel tubes with static protection kit.


FTI AIR - AIR OPERATED DOUBLE DIAPHRAGM PUMPS

Powered by compressed air, FTI Air pumps can run dry, handle solids and abrasives, pump viscous and shear-sensitive fluids and are easy to install and operate. They offer excellent chemical resistance with corrosive/hazardous chemicals and can be used for numerous applications including loading and unloading tankers, totes and barrels; for batching/dosing chemicals or as portable utility pumps.

  • Simple, durable design – Fewer parts improves reliability and maintenance.
  • Non-stalling air valve – Simple, rugged, reliable design.
  • Variable flow and pressure — Easy adjustment makes it easy to meet application requirements.
  • Ease of operation & maintenance — Fewer parts makes FTI Air pumps easy to install, operate and maintain.
FTI Air Product
                             Image